|
 |
1.
|
Each axis uses precise
ballscrew and linear motion guide. |
2.
|
AC servo motor directly go through
coupling to drive the ballscrews. |
3.
|
The work table is manufactured from
stainless design to ensure best maintence. |
4.
|
The U, V axes located upper from
the columm to offer accurate stability, it can
reach precise taper machining when facing high
wire tension and high water pressure. |
5.
|
High rigiding design, and well thermal
balance are used for precision machining. |
6.
|
Submerged work tank you don't find
more spread water, offers a complicated machining
shape request and stable cutting status. |
7.
|
To put the work piece into submerged
water, keeps same temperature and reach the work
piece stability and non-transformed shape. |
8.
|
Simple and reliable Automatic Threading
Device design, applies high precision accuracy
and easy operator maintenance. |
9.
|
Specially designed Ø 1.0mm
high pressure water jet on the Automatic Wire
Threading system, offers enhanced reliability
for threading brass wire from Ø 0.1mm~Ø
0.3mm. |
10.
|
The Automatic Wire Threading cut
design ensures a clean-cut burr free sharp point
to the new wire. |
11.
|
Time saving submerged Auto Wire
Threading facility. |
| 12.
|
Heavy-duty wire spool shaft design
for ease of maintenance. |
13.
|
High specification Dynamic Wire
Tension Controller. |
14.
|
Special upper / lower wire guide
set, provides high-speed automatic wire threading
in water. |
15.
|
High speed submerged cutting for
up to 450mm thick work piece. |
16. |
Specilly designed Wire Chopper is available
for some models. |
17. |
Large wire spool capacity (20 kgs or above)
system as an option, to increase wire change over
time up to 170 hours (20Kg brass 0.2mm). |
18. |
Water jet cleaning system located at rear of
the tank ensures that the back seal plate and
lower arm assembly are kept are free from erosion
debris. |
19. |
Smooth lower arm movement fitted with anti leaking
system. |
20. |
Lower arm thermal cooling system ensures high
stability. |
21. |
Hardened Stainless work tank base, enhance
rigidity and support Sealed, well-balanced, box-type
design casting of the machine body ensures high
thermal balance stability. |
22. |
Each axis uses high precision C1 class ball
screws with manual single shot lubrication system
on the X and Y axes fitted as standard. |
|
| |
 |
A.
|
AC servo motors are used
on machines, provides " Positioning
& Tension" control with high
reliability. |
B.
|
DC motors control offers different wire
diamenters for various data. |
C.
|
High pressure air applied at wire-melting
system, makes no burrs to the new wire. |
D.
|
Intelligent wire-cutting device, a different
voltage occurs for different wire diamenters.
|
E.
|
Unique upper wire guide structure produces
a high pressure watwe jet, AWT can be
done in water, operator can choose Ø
0.5mm~Ø 2.0mmassistant flushing
nozzles to thread the Ø 0.1mm~Ø0.3mm
wire. |
F.
|
Special lower wire guide to offer 2
high pressure water jet with 45° and
180°, ensure the wire will be threaded
successfully. |
G.
|
Ceramic wire collecting wheel is used
to bring a longer lifetime for parts. |
H.
|
PWM DC wire cillecting motor is equipped
to provide the linear stability. |
|
|
|
|
|
| |
 |
 |
New generation
control system WINDOWS based design Equipped
with unique RTX Clock software User friendly,
CNC control interface, for easy operation 15"
touch-screen monitor and mouse, smoother programming
for users, Optional 4 axes on-board conversational
programming system.
Intelligent OV Circuit
Specially designed intellent ignition control
circuit permits ignition voltage, voltage adjustment
and control by computer, and is excellent for
machining various work piece materials, with
both thick and thin sheet plates, Also a voltage
stabilizing circuit maintains discharge machining
at constantly high speeds and 20%, especially
when working on particularly thick or think
work piece.
Super Fine Loop
The super fine loop employs a high frequency,
non-electrolytic machining method. The process
combines stability wire feeding tension control.All
of which fabricates an extremely fine work piece
surface. |
|
|
 |
Allows the operator/company
to remotely monitor the machine either at work or via
the internet.
 |
 |
20KG WIRE BOBBIN
20KG Wire system offers long working hours
|
| |
 |
 |
OPERATING FUNCTION:
1. Software limit protection
2. Single block / stop
3. Machine lock
4. Optional block skip
5. Operational stop
6. Machine, increment, absolute positioning
7. Manual data input(MDI)
8. EDM search / Load to On-line mode
9. Automatic power recovery
10. Start point return
11. Hold point return
|
12. Reference point set / return
13. Trace function
14. Retrace function
15. Approach function
16. Short-circuit interruption
17. Z axis down-limit protection
18. Automatic power-off function
19. G54~G59 Multi coordinate
20. AWT function
21. Z axis lower limit retract |
AUXILIARY FUNCTION:
1. Maintenance function
2. Machining history
3. Users parameter set
4. On line help / alarm notice
5. Key trace |
PROGRAM EDITING FUNCTION:
1. Cutting path display
2. 2D / 3D preview
3. String search / replace
4. Block function / copy
5. Copy function / software copy protection
6. Program editing, copy, delete
7. RS232 interface / transfer
8. N code set
|
NC / TAPER FUNCTION:
1. Mirror image
2. Axis exchange
3. Taper cutting
4. Offset / H parameter set
5. Corner control
6. Scale / rotation function
7. Path color set
8. Top and bottom different machining |
MANUAL FUNCTION:
1. Edge finding
2. Slot finding
3. Hole center finding
4. Side center finding
5. Arc center finding
6. Reference point search
7. Auto vertical alignment function
8. Parallel compensation |
|
| |
 |
 |
| |
 |
|
| |
Remote
Control Box:
All in One 5 axis LCD coordinate remote control
box, operation done in one finger.
|
CF
Memory Card:
Replace traditional 3.5" floppy disk, offers
easy transfer of data and large storage capacity.
|
|
| |
 |
|
| |
 |
| ITEM |
UNIT |
AWT355S |
| Max.
work piece dimonsin (WxDxH) |
mm |
710
x 560 x 205 |
| Max.
work piece weight |
kgs |
300 |
| X travel |
mm |
350 |
| Y travel |
mm |
250 |
| Z travel |
mm |
210 |
| U travel |
mm |
80 |
| V travel |
mm |
80 |
| Drive
system |
|
AC
servo motor |
| Wire
diameter |
|
 0.15~ 0.30(Standard
)
0.10
(optional) |
| Max.
taper angle |
mm |
 24 o
/ 80mm |
| Outside
dimension (WxDxH) |
mm |
1170
x 1730 x 1990 |
| Net
weight |
kgs |
2100 |
|
| * All specification and design
are subject to change without notices. |
|
| |
 |
| ITEM |
UNIT |
AWT355S |
| Filter
system capacity |
L |
640 |
| Filter
element |
|
Paper
filter |
| Ion
exchange resin capacity |
L |
14 |
| Water
quality control |
|
Auto |
| Water
temperature control |
|
Auto |
|
|
| |
 |
Controller
device |
Industrial
grade Pentium 2 IPC |
Memory
device |
64MB
DOM |
Screen
display |
12.1"
800x600 Color TFT LCD |
Input
means |
Keyboard,
RS232, 3.5" Floppy Disk, CF
Card |
Service
control means |
Fully-closed
circuit AC servo control |
No.of
control means |
6 axes |
Instrction
value |
0.001mm |
Max.
instruction value |
9999.999mm |
Interpolation
functions |
Linear / Circular |
Positioning
command format |
Incremental / Absolute |
Wire
diameter compenation |
99.999
mm |
Pattern
rotation |
0~360o |
Processing
condition |
9999 sets |
|
|
|
| |
 |
Discharge
power supply |
AC/DC
MOSFET |
Surface
roughness |
Ra
0.3~ 0.4 um Ra |
Intelligent
ignition power supply |
Ultra-thin,
thick plate |
Max.
cutting speed |
250mm 2 / 0.3mm
straight line cutting |
Electricity
required |
3
Phase, 220V / 380V, 10%25A, 18KVA |
|
|
| |
 |
|
Work piece thickness 100mm
