JOEMARS MACHINE & ELECTRIC INDUSTRIAL CO., LTD.

JMNC1470S+HD100+D1470S

JM322/JM430/JM500/JM650

1.	Eacg axis uses precise ballscrew and liner motion guide.
2.	AC servo motor directly go through coupling to drive the ballscrews.
3.	The work table is manufactured from stainless design to ensure best maintenance.
4.	The U,V axes located upper from the columm to offer accurate stability, it can reach precise taper machining when facing high wire tension and high water pressure.
5.	High rigidly design, and well thermal balance are used for precesion machining.
6.	Simple wire-feeding and wire-collecting design is developed for higher reliability.

1.	Submerged work tank you don't find more spread waer, offers a complicated maching shape request and stable cutting status.
2.	To put the work piece into submerged water, keeps same temperature and reach the work piece stability and non-transformed shape.
3.	Maintain each part of mechanical table a heat balance, the water temperature control and cover the worktable with stable heat, the material of work piece may not be changed or transformed easily.
4.	A de-rust stainless lower guide arm to isolate the high temperature waer flow by air gap, can totally separate the heat transmission.

Pulse Control of Discharging Circuit

Employs a self-developed high speed discharging control chipest, featuring high calculation processing capability up to 100 mega-times per second. The control circuit provides instantly correct judgement and calculation processing for arious discharging conditions. Also, it automatically adjusts and controls discharging energy output for abnormal discharging waves. Machining efficiency can reach up to 180mm per min.

Controller Powerful 64 Bit CPU

The controller is a high speed, stable, industrial grade computer, featuring powerful NC calculation function for high accuracy machining. Comprehensive on-line HELP information and user-friendly operational presents an extra powerful calculation feature on these new generations of functions based on a new generation pcbased control. No matter how complicated the machining job may be, the opertaor caneasily work out the desired product.

EF non-electrolytic of discharging circuit

High speed EF (non-electrolytic) discharge machining metod. It minimizes the possibility of work piece surface cracking or clectrolyzed problems, which greatly upgrades the mold discharging effects and saves copper wire consumption.

Intelligent OV Circuit

Specially designed intellent ignition control circuit permits ignition voltage, voltage adjustment and control by computer, and is excellent for machining various work piece materials, with both thick and thin sheet plates. Also a voltage stabilizing circuit maintains discharge machining at constantly high speeds and 20%, especially when working on particularly thick or think work piece.

Modulay Design

The circuit board is a modular design. Each module interface features self-siagnostic output combined with signal indications This simplifies trouble-shooting and provides convenience in maintenance.

Super Fine Loop

The super fine loop employs a high frequency, non-electrolytic machining method. The process combines high stabiliy wire feeding tension control. All of which fabricates and extremely fine work piece surface.

Detailed Operation Instructions, Machining Information and Warning Messages for Readily Controlling Machining Conditions

The operational screen provides large quantities of graphic desceiptions, on-line HELP, warning descriptions, detailed operation instructions and message. This enable the operator to understand the current machine condition, so that the machining result can be easily controlled.
**Simply input the wire diameter, work piece material / thickness, and surface roughness required, then the corresponding machining conditions are automatically called out from the machining databank.

	Adjustment of automatic cutting conditions.
	Notices of consumable parts life and daily maintenance information.
	Real-time on-line warning HELP function.
	Machining status list.
	3-D graphics preview.
	Offset function for rough machining wire consumption. Straihtness display for high speed machining.
	Corner control function eliminates corner breaking problems.
	Automatic power recovery.
	Taper:G52, G51.T+,A1
	Offset:G41D0.20,G41d1/
	Sub-program:M98, M99
	EDM code:S

Corner / Arc Machining control

Using advanced preview control, wire tension and wire speed will be automataically adjusted when approaching to corner / arc cutting position. It can ensure corner / arc cutting accuracy by not changing wire cutting path.

OPERATING FUNCTION:

1.	Software limit protection
2.	Single block / stop
3.	Machine lock
4.	Optional block skip
5.	Operational stop
6.	Machine, increment, absolute positioning
7.	Manual data input(MDI)
8.	EDM search / Load to On-line mode
9.	Automatic power recovery
10.	Start point return
11.	Hold point return
12.	Reference point set / return
13.	Trace function
14.	Retrace function
15.	Approach function
16.	Short-circuit interruption
17.	Z axis down-limit protection
18.	Automatic power-off function
19.	G54~G59 Multi coordinate

AUXILIARY FUNCTION:

1.	Maintenance function
2.	Machining history
3.	User parameter set
4.	On line help / alarm notice
5.	Key trace

PROGRAM EDITING FUNCTION:

1.	Cutting path display
2.	2D / 3D preview
3.	String search / replace
4.	Block function / copy
5.	Copy function / software copy protection
6.	Program editing, copy, delete
7.	RS232 interface / transfer
8.	N code set

NC / TAPER FUNCTION

1.	Mirror image
2.	Axis exchange
3.	Taper cutting
4.	Offset / H parameter set
5.	Corner control
6.	Scale / rotation function
7.	Path color set
8.	Top and bottom different machining

MANUAL FUNCTION:

1.	Edge finding
2.	Slot finding
3.	Hole center finding
4.	Side center finding
5.	Arc center finding
6.	Reference point search
7.	Auto vertical alignment function
8.	Parallel compensation

ITEM	UNIT	WT655
Max. work piece dimonsin (WxDxH)	mm	1100 x 750 x 345
Max. work piece weight	kgs	700
X travel	mm	650
Y travel	mm	400
Z travel	mm	350
U travel	mm	100
V travel	mm	100
Drive system		AC servo motor
Wire diameter	mm	0.15~0.30(Standard )
Max. taper angle		24^o / 80mm
Outside dimension (WxDxH)	mm	1800 x 2240 x 2400
Machine net weight	kgs	2850

PS. Max taper angle must use "wide angle flushing nozzle / guide set ". All model standard angle is

15o

ITEM	UNIT	WT655
Filter system capacity	L	450
Filter element		Paper filter
Ion exchange resin capacity	L	6.8
Water quality control		Auto
Water temperature		Auto

Controller device	64 Bit IPC
Memory device	16MB DOM
Screen display	12.1" 800x600 Color TFT LCD
Input means	Keyboard, RS232, 3.5" Floppy Disk
Service control means	Fully-closed circuit service control sysgem
No.of control means	6axes
Instrction value	0.001mm
Max. instruction value	9999.999mm
Interpolation functions	Linear / Circular
Positioning command format	Incremental / Absolute
Wire diameter compenation	0~360^o
Processing condition	9999 ssets

Discharge power supply	AC/DC MOSFET
Surface roughness	Ra 0.3~ 0.4 um Ra
Intelligent ignition power supply	Ultra-thin, thick plate
Max. cutting speed	250mm² / 0.3mm straight line cutting
Electricity required	3 Phase, 220V / 380V, 10%25A, 18KVA

* All specification and design are subject to change without notices.

	Automatic vertical alignment jig
	Paper filter
	Tool kit
	Wire guide 0.25mm
	Brass wire 0.25mm
	Ion exchange resin

	Tension meter
	Wire guide (0.10mm, 0.15mm, 0.20mm, 0.30mm)
	Dielectric cooling unit
	Others upon request
	Super fine circuit
	Consumable parts( Wire, Flushing nozzles...etc)