Main Mechanical of DNC 645T:
1.
 All supported design to provide the high accyracy and stability of work piece.
2.
 Half-submerged work tank for user-friendly design.
3.
 Mechanical body,water tank and power supply system (generator) are all separated.
 
1.
Chinese / English display.
2.
Metric and GB unit display and program setting Machine Coordinate Work Coordinate and Follwing Error display.
3.
Three manual modes (continuos,increment movement, without protection).
4.
Home search and positection.
5.
Automatic edge, Center two PT.,Locate Center, Locate Comer, work axis Rotation, Mirror.
6.
GM Code program and 500 blocks of workpiece program.
7.
Help on Line.
8.
DXF file and WireCut Program Transfer.
9.
Provides the dialog program edit function of Rectangular Pattern Circle Pattern etc.
10.
Provides the function of calling machining sub-program with max. 8 Layers
11.
Has multi-set maching parameters database, each set of database can store 100 set of machining parameter of operators.
12.

Can store 100 machining depths of 100 operators.
13.
Single and Multi Hole Machining.
14.
Machining path display.
15.
Machining Simulation.
16.
Software limit.
17.
Program Set (Start block and end block setting).
18.
When the machining reach the depth, the electrode will automatically detect and move to the fixed height of the machining surface.
19.
Single / Multi Hole Machining when the electrode is run out during the machining, shift to the function of automatic compensation.
20.
Variable Depth Machining.
21.
Automatic Electrode Change (DNC645T only).
22.
 RS-232 file transfer.
22.
Using "MOSFET" sparking circuits, suitable for tunsten carbide, hard alloys, hard steel, and powder metallurgy.
 
 

ITEM MODEL
DNC645T
Work table size mm

730 x 540
X, Y travel mm
650 x 450
Z axis travel mm
400
W axis travel (Spindle servo travel) mm
400
Max. workpiece weight kgs

1500
Electrode size mm
0.2-3.0 (0.2-6.0 is optional)
Max. electrode length mm
400
Guide plate to work table mm
62~462
Max. workpiece dimensions (WxDxH) mm
1020x950x260 / 680x950x400
Machining dielectric  
Distilled water
Dielectric tank capacity l
280
Machine weight kgs
2000
Machine dimension (WxDxH) mm
1500x1745~2195x2150~2550
ACT tool number pcs
20
 

ITEM
 MODEL
DN38
Power input  

200/220/364/380/415/440 3phase VAC
Max. power consumption KVA
5
Max. peak current A
38
Sparking condition number sets
100 set (Each file)
On time setting steps

99 steps (1~99)
Off time setting steps
99 steps (1~99)
Peak current setting steps
15 steps (1~15)
Capacitor setting steps
16 steps (0~15)
Gap voltage setting steps
0~100
Max. speed setting of spark machining steps
0~100%
Servo sensitlvity axis
0~100%
CNC control  
Industrial PC-based CNC controller
Monitor  
12.1" TFT LCD
Input resolution mm
0.001
Command code format  
GM code
Net weight kgs
320
Outside dimensions mm
680x1070x1820

 
Tool box
Stainless clamping kits
Electrode holder 0.2~3.0mm
Electrode ceramic guide 1.0mm
Electrode tube 1.0mm
Dielectric tank(10 liter)-For D/DZ only
Rubber water stopoer
Filter
Operation manual
 
   
Filter
Brass/copper electrode Tube (Length 300mm or 400mm)
Ceramic guide & rubber water stopper.
Range:0.2~3.0mm, per 0.1 mm increment.