 |
| |
 |
 |
 |
Total of 50 programs, each program can do a single
step, 5 steps or a maximum of 10 steps machining
(option) and each step includes 12 kinds of maching
parameters.
By using the JOEMARS Fuzzy Logic Control
System, the operator can get a total of 9600 sets
of machining parameters which can also be modified
at any time during sparking without affecting
the stored parameters. |
|
| |
 |
10% - 45% faster than conventional model. |
|
| |
 |
Rdduced wear in approach contact areas |
|
| |
 |
A much higher quality machining surface that requires
a mininum amount of polishing reduced by 25%. |
|
| |
 |
Only input: (1) Machining materials, (2) Electrode
size, (3) Electrode wear & (4) Peak current.
Then the best machining parameters will be auto
set to start machining from rough to final surface
finishing automatically. |
|
| |
 |
The JOEMARS Fuzzy Logic Control System
will auto monitor & adjust the machining parameters
in the event of a poor machining condition. Once
the condition has been cleared it will auto return
to the pre-set machining parameters to achieve
the best performance. |
|
| |
 |
|
 |
MACHINE UNIT SPECIFICATIONS (ZNC) |
| ITEM |
UNIT |
JM 322 |
| Work
table size |
mm |
600x300 |
| X travel |
mm |
300 |
| Y travel |
mm |
200 |
| Z travel |
mm |
200 |
| W travel |
mm |
200 |
| Ram
platen to work table |
mm |
190~590 |
| Max.
electrode weight |
kgs |
60 |
| Max.
workpiece weight |
kgs |
550 |
| Work
tank (WxDxH) |
mm |
830x500
x300 |
| Weight
of machine unit |
kgs |
1050 |
| Outside
dimensions (WxDxH) |
mm |
1530x1590
x2175 |
| AZR / AZDR SERIES GENERATOR (ZNC SERIES) |
| ITEM |
UNIT |
AZ50R/AZ50DR |
| Max. Machining Current |
A |
50 |
| Total Power Input |
KVA |
4.5 |
| Max. Metal Removal Rate |
mm3/min |
390 |
| Electrode Wear Ratio |
% |
0.25 |
| Best Surface Roughness |
um Ra |
0.20 |
| Net Weight |
kg |
180 |
| Outside Demensions (WxDxH) |
mm |
580x725x1730 |
|
|
|
