 |
 |
 |
 |
Total of 50 programs, each program can do a single
step, 5 steps or a maximum of 10 steps machining
(option) and each step includes 12 kinds of maching
parameters.
By using the JOEMARS Fuzzy Logic Control
System, the operator can get a total of 9600 sets
of machining parameters which can also be modified
at any time during sparking without affecting
the stored parameters. |
|
| |
 |
10% - 45% faster than conventional model. |
|
| |
 |
Rdduced wear in approach contact areas |
|
| |
 |
A much higher quality machining surface that requires
a mininum amount of polishing reduced by 25%. |
|
| |
 |
Only input: (1) Machining materials, (2) Electrode
size, (3) Electrode wear & (4) Peak current.
Then the best machining parameters will be auto
set to start machining from rough to final surface
finishing automatically. |
|
| |
 |
The JOEMARS Fuzzy Logic Control System
will auto monitor & adjust the machining parameters
in the event of a poor machining condition. Once
the condition has been cleared it will auto return
to the pre-set machining parameters to achieve
the best performance. |
|
| |
 |
|
 |
MACHINE UNIT SPECIFICATIONS (ZNC) |
| ITEM |
UNIT |
JM 650 |
| Work
table size |
mm |
920x600 |
| X travel |
mm |
600 |
| Y travel |
mm |
500 |
| Z travel |
mm |
280 |
| W travel |
mm |
300 |
| Ram
platen to work table |
mm |
240~820 |
| Max.
electrode weight |
kgs |
300 |
| Max.
workpiece weight |
kgs |
2200 |
| Work
tank (WxDxH) |
mm |
1400x830x540 |
| Weight
of machine unit |
kgs |
2500 |
| Outside
dimensions (WxDxH) |
mm |
1825x2320x2625 |
| AZR / AZDR SERIES GENERATOR (ZNC SERIES) |
| ITEM |
UNIT |
AZ100R/AZ100DR |
| Max. Machining Current |
A |
100 |
| Total Power Input |
KVA |
9 |
| Max. Metal Removal Rate |
mm3/min |
770 |
| Electrode Wear Ratio |
% |
0.25 |
| Best Surface Roughness |
um Ra |
0.20 |
| Net Weight |
kg |
360 |
| Outside Demensions (WxDxH) |
mm |
580x835x1730 |
|
|
|
